Skip to content
BAIGEPackaging
MaterialsBuying guide

Non-woven vs kraft paper vs white cardboard bags: which should your brand print on?

Non-woven, kraft paper and white cardboard can all carry a logo, but they behave very differently in use, print and end-of-life. Compare all three on the criteria that actually decide a packaging project.

Baige Packaging production teamPublished 7 min read
Non-woven, kraft paper and white cardboard shopping bags compared for brand packaging
Back to all guides

Non-woven, kraft paper and white cardboard are the three materials buyers compare most often for retail and promotional packaging. They can all carry a logo, but they behave very differently in strength, print, cost and end-of-life — and the right choice usually comes down to how the bag will be used, not which material sounds more sustainable.

This guide compares them on the criteria that decide most projects: load and reuse, print result, cost structure and disposal. It is written from the production side — the specifications we quote every week.

What each material actually is

Non-woven bags are made from spunbond polypropylene fibres bonded by heat and pressure. The result is a fabric-like sheet measured in grams per square metre (GSM); 80–120 GSM is typical for shopping bags. It does not fray when cut, accepts heat sealing and ultrasonic welding, and can be laminated with a printed film.

Kraft paper bags use wood pulp, usually virgin or recycled, at 80–180 GSM. They are folded, glued and reinforced with paper or film patches. The natural, tactile surface suits simple one- or two-colour designs, and it creases neatly into gussets and flat bases.

White cardboard bags are made from bleached board at 210–400 GSM, often laminated and die-cut. The smooth white surface takes offset print, foil, spot UV and embossing — the construction used by most gift and premium retail bags. It is stiffer and heavier than the other two, and usually costs more per piece.

Strength, load and reuse

Match the material to how many trips the bag must survive. A 100 GSM non-woven bag with welded handles typically carries 8–12 kg and stays in service for months; it wipes clean and folds flat. Kraft is stiffer and holds its shape on a counter, but creases weaken it over time and moisture softens the paper, so it suits single-trip takeaway and food use. White cardboard is the stiffest of the three and presents best on a shelf, but it is not a load carrier: 250–350 GSM gift bags are designed for light retail items, and heavy or wet products will mark or distort the board.

Print quality and brand presentation

Non-woven accepts screen printing, heat-transfer printing and, when laminated, gravure for photographic detail. Plain non-woven is best for bold flat colour; laminated non-woven holds gradients and images. Kraft absorbs ink, so colours look slightly muted and large solid areas show fibre texture — a feature for natural brands and a limitation for precise Pantone matches. White cardboard is the print-quality leader: offset litho gives sharp text and photographic colour, while foil, spot UV and embossing add a premium finish that neither fabric nor kraft can match.

Cost structure: compare cost per use

Kraft usually has the lowest unit price at similar sizes; non-woven costs more per bag but delivers better reuse economics; white cardboard costs the most because of heavier board, lamination and finishing. The comparison that matters is cost per store visit or per month of use, not cost per bag.

Tooling differs too: screen printing on non-woven needs one screen per colour, printed kraft often needs a plate or cylinder setup, and foil or embossing on card needs its own dies. Fewer colours and standard sizes keep all three cheaper.

End-of-life questions to ask

All three materials come with nuances. Non-woven PP is a plastic: it is recyclable where collection facilities exist, but it does not break down quickly in the environment. Kraft paper is recyclable where facilities exist and can be made from recycled fibre, but food-soiled or coated paper may not be accepted by every recycler. White cardboard is paper-based and recyclable, yet lamination, foil and heavy coatings can complicate collection.

Ask your supplier for the material composition in writing, whether any coating or lamination is used, whether handle and patch materials match the body, and which test reports they can share. Treat any supplier who answers with "100% biodegradable" without documentation with caution.

Side-by-side comparison

CriteriaNon-woven PPKraft paperWhite cardboard
Typical weight80–120 GSM80–180 GSM210–400 GSM
Common printingScreen, heat transfer, gravure laminationFlexo, offset, screen (limited)Offset litho + foil / UV / emboss
Load in daily use8–12 kg4–6 kgLight retail items; presentation-led
Water resistanceGood; wipes cleanLow unless coatedLow unless laminated
Reuse lifeMonths of regular useLimited; creases softenPremium presentation, not reuse-focused
Typical MOQFrom 50 pcsFrom 1,000 pcsFrom 500–1,000 pcs
Best forReusable retail and promotional bagsTakeaway, food and natural retailGift sets and premium retail

Which should you choose?

Choose non-woven when the bag should be reused for months, carry 8 kg or more, and act as a brand item customers keep — especially if you need full-colour or photographic print.

Choose kraft paper when the bag is a takeaway or single-trip carrier, when you want an uncoated natural look with one- or two-colour print, and when stiffness on the counter matters more than reuse life.

Choose white cardboard when the bag is a gift or premium retail item where shelf presence, print sharpness and finishes matter more than load capacity or reuse — think cosmetics, jewellery, apparel and seasonal gifting.

Many projects end up with all three: kraft for food and takeaway, non-woven for the retail shopping bag, white cardboard for gift sets. If you want to look at the three materials in the weight you are considering, request a sample pack from our team.

What to send in your first enquiry

Send bag type, size (width × gusset × height), material and GSM preference, print colours and artwork status, target quantity and delivery date. With those five points a factory can quote a realistic price and lead time instead of a wide range.

Figures in this guide are typical ranges from our own production. Exact MOQ and lead time depend on bag size, material, print method and season — confirm both against your specific specification.

About the author

Baige Packaging production team

Production team, Baige Packaging

Material sourcing, printing, QC and export packing for custom bag orders. Every guide is checked against real production specifications and updated when a standard changes.

Request a quote

Need a bag built to this specification?

Send your size, material, printing and quantity — we reply with pricing, sampling options and lead time within one business day.