How to choose bag GSM: a practical guide by material
GSM is the first number most buyers ask for, but heavier is not automatically better. Here is what GSM changes in non-woven, kraft, cardboard and PE bags — and how to validate the weight you choose.

Ask ten bag suppliers for a quote and most of them will ask for the same first number: what GSM do you need? GSM — grams per square metre — is shorthand for how heavy and how substantial a bag feels, and it is the fastest way to compare two specifications on paper.
But GSM is only one variable. The same 100 GSM non-woven can feel strong or flimsy depending on fibre quality and how the handles are attached; kraft paper at 120 GSM can outperform a 150 GSM bag if the gusset and base are folded properly. This guide explains what GSM changes, and how to test the weight you choose.
What GSM does — and does not — tell you
GSM measures weight per square metre of material. For paper, non-woven and cardboard it is a useful proxy for thickness and stiffness. It says nothing about fibre quality, coating, weave density or handle construction.
PE bags are the exception: polyethylene film is measured in microns (film thickness), not GSM. A 65-micron LDPE shopping bag and a 100 GSM non-woven bag can carry a similar load while feeling completely different.
Typical GSM by material
| Material | Common bag weight | Typical use | Watch out for |
|---|---|---|---|
| Non-woven PP | 60–140 GSM | 80–100 GSM retail; 110–140 GSM premium reusable | Below 70 GSM, handles need extra reinforcement |
| Kraft paper | 80–180 GSM | 80–110 GSM takeaway; 120–150 GSM shopping | Heavy loads need a reinforced base or cardboard insert |
| White cardboard | 210–400 GSM | 250–300 GSM gift bags; 350–400 GSM premium retail | Thicker board needs sharper creasing to fold cleanly |
| PE film | 40–80 micron | 60–70 micron LDPE shopping bags | Thinner film needs a reinforced die-cut handle |
How GSM changes performance
- Tear strength: rises with GSM up to a point, then depends more on fibre and seam quality than on weight.
- Stiffness and hand feel: heavier feels more premium on the shelf, but can be awkward to fold into a shipping carton.
- Print quality: heavier board holds foil and embossing better; very light non-woven distorts under heavy ink coverage.
- Handle attachment: the handle patch, eyelet or weld carries the load — this is where light bags fail first.
- Cost and freight: GSM drives material cost directly and adds to shipping weight at high volumes.
Matching GSM to the use case
- Grocery and general retail: 90–110 GSM non-woven, or 120–150 GSM kraft for a paper option.
- Apparel and boutique: 100–120 GSM non-woven or 250–300 GSM white card; PE at 60–70 micron for waterproof needs.
- Food takeaway: 80–110 GSM kraft with a grease-resistant liner; heavier paper is not a substitute for a liner.
- Luxury gifting: 350–400 GSM white card with lamination, foil and ribbon handles.
- Promotional and event bags: 70–90 GSM non-woven keeps cost and freight low for short-life use.
The handle and seam matter as much as GSM
Most bag failures we see in returns are not torn bodies — they are handles pulling out of the sheet. A 100 GSM bag with an X-stitched handle patch will outlast a 120 GSM bag with a glued paper handle. When you compare samples, load the bag with its intended weight and lift it repeatedly rather than simply squeezing the material.
How to validate a weight specification
- Order two weights in the same size and fill them with the real product.
- Run a static load test: hang the loaded bag for 24 hours at the intended weight plus 20%.
- Do a drop test: 1.2 m onto a hard floor, packed as it will ship.
- Test humidity: leave a paper bag in a damp room overnight — if it softens, specify a coating or reduce the load.
- Print trial: check ink coverage on the chosen weight before bulk, since light material distorts differently.
Common mistakes
- Over-specifying "to be safe", which raises cost and freight without improving the failure point.
- Judging only by hand feel: lamination and coatings change perception far more than GSM.
- Ignoring the gusset: a 25 mm gusset often does more for capacity and stability than +20 GSM.
- Forgetting that handles, eyelets and patches add perceived quality — and are the real load path.
If you are unsure, request the same bag in two weights and compare them with your actual product inside. That test takes a week and prevents a full production run in the wrong specification. Send us your bag size and load requirement and we will recommend a starting weight for your sample round.
Figures in this guide are typical ranges from our own production. Exact MOQ and lead time depend on bag size, material, print method and season — confirm both against your specific specification.
About the author
Baige Packaging production team
Production team, Baige Packaging
Material sourcing, printing, QC and export packing for custom bag orders. Every guide is checked against real production specifications and updated when a standard changes.
Related guides.
The next decisions most buyers face after this one.

Non-woven vs kraft paper vs white cardboard bags: which should your brand print on?
Non-woven, kraft paper and white cardboard can all carry a logo, but they behave very differently in use, print and end-of-life. Compare all three on the criteria that actually decide a packaging project.
Read article
Printing methods for packaging bags: a buyer's comparison
Screen, heat transfer, gravure, flexo, offset and foil each solve a different problem. Compare the main bag printing methods by setup cost, volume and artwork requirements.
Read article
Custom bag MOQ and lead times: what buyers should expect
MOQ and lead time are not fixed numbers — they come from material minimums, printing setup and factory capacity. Here is how both are calculated and how to plan around them.
Read articleRequest a quote
Need a bag built to this specification?
Send your size, material, printing and quantity — we reply with pricing, sampling options and lead time within one business day.