Skip to content
BAIGEPackaging

Quality & factory capability

Quality you can audit, not just read about.

Six documented inspection checkpoints, AQL 2.5 final inspection by default, retention samples from every lot and test reports available on request. This page shows exactly how a custom bag order is controlled — and what we will not claim.

Lamination and bag-making production line for non-woven packaging
Default major-defect level
AQL 2.5
Documented QC checkpoints
6
Retention samples kept
12 mo
Typical production lead time
12–18 d

We define quality before production, not after you complain.

For a custom order, quality is a set of agreements: the specification, the approved proof, the approved sample and the tolerance bands written down before anyone runs the machines.

Our quality policy is deliberately unglamorous. We do not promise zero defects, because that would be untrue of any printing and converting operation. We commit instead to four things that a buyer can check:

  • Agreement before production — the specification, material, GSM, size tolerances, print colours and packing method are confirmed in writing, and the approved proof or sample is the reference used at the machine.
  • Inspection at defined points — incoming material, first-off print, in-process conversion and final AQL inspection are recorded on a batch card, with the inspector's sign-off and the defect count.
  • Traceability after delivery — each carton carries a lot number; the batch card links it to material, print run, inspection record and retention sample.
  • Honest corrective action — if a lot fails, we quarantine it, tell you before shipment rather than after, and agree rework, replacement or credit in writing.

Factory management reviews defect data and claim trends every month. When the same issue appears twice, the process — not just the batch — is changed, and the change is recorded so it survives staff turnover.

Written specification

Size, material, GSM, print colours and packing are locked in a spec sheet signed off before sampling.

First-off approval

The first printed and converted pieces are checked against the approved proof before the run continues.

Recorded inspection

Every lot has a batch card with checkpoints, defect counts and inspector sign-off.

Corrective action

Repeat defects trigger a process change, not just a rework of the affected cartons.

“Every shipment leaves with a batch record behind it. If we cannot explain how a bag was made and inspected, we should not be shipping it.”
Production management team, Wenzhou factory

Six checkpoints between your artwork and your warehouse.

Each checkpoint has an owner, a record and a defined action when it fails. The process applies to every order — the depth of testing scales with the order value and the buyer's requirements.

Incoming polypropylene resin bags checked before production
Technician checking printed packaging bags at the handle-welding station
Colour film and non-woven rolls staged for material checks
  1. 01

    Specification & proof lock

    The order spec sheet, dieline and final proof are signed off. Material, GSM, colour references and packing method are frozen before any material is issued to the line.

    Signed spec sheet and approved proof on file

  2. 02

    Incoming material inspection

    Fabric and paper rolls are checked for GSM, width, colour and visible defects against the material declaration; film is checked for thickness and printability.

    GSM and width measured per roll; rejects quarantined

  3. 03

    First-off print check

    The first printed pieces are compared with the approved proof under standard light: layout, registration, colour and barcode readability. The press does not continue until the check passes.

    First-off signed by production and QC

  4. 04

    In-process conversion checks

    During cutting, sealing, stitching and handle attachment, the line checks dimensions, seam strength and handle placement at a fixed sampling frequency, recording defects on the batch card.

    Hourly sampling; defects logged against lot number

  5. 05

    Final AQL inspection

    The finished lot is inspected under AQL 2.5 for major defects and AQL 4.0 for minor defects by default, adjusted if your order specifies another standard. Inspectors check appearance, print, dimensions, handle strength and packing.

    AQL report with defect breakdown before packing

  6. 06

    Export packing & document check

    Carton quantity, shipping marks, desiccant, packing list and container loading plan are checked against the order. Photos of the packed cartons are shared before the container closes.

    Packing list and carton photos archived

Test reports for seam strength, GSM, colour fastness and handle load are available on request. Buyer-appointed third-party inspections are welcome; we schedule the visit and provide line access and finished goods.

See the production floor

A short walkthrough of our non-woven production floor: material rolls, bag-making lines, printing and packing. Filmed on site.

On-site footage · Wenzhou factory · 2 minutes

Book a factory visit

Machines matched to the four bag families we make.

Printing, conversion and inspection equipment is all in-house. That is what allows us to run a rush order without waiting for an outsourced process — and to hold a consistent colour standard between reorders.

Automatic printing press running custom packaging bag artwork at the factory
Bag-making and lamination line for non-woven packaging
Machines matched to the four bag families we make.
EquipmentQuantityUsed for
Six-colour flexographic printing press2 unitsNon-woven and paper bag printing, 1–6 spot colours; used for large repeat runs.
Heat-transfer / sublimation line2 linesFull-colour, photographic printing for non-woven and polyester bags with gradients or many colours.
Offset printing press1 unitHigh-detail CMYK printing for white cardboard gift bags, often followed by lamination.
Automatic bag-making machines12 unitsCutting, bottom sealing, side sealing and gusset forming across paper and film bags.
Ultrasonic handle welding machines6 unitsHandle attachment for non-woven and laminated bags without visible stitching holes.
Industrial stitching lines20 stationsStitched non-woven bags, reinforced handles and heavy-load constructions.
Die-cutting machines4 unitsPaper handles, window patches, shaped bags and cardboard gift-box inserts.
Lamination line1 lineMatte and gloss film lamination for paper bags and board, plus moisture-resistant finishes.
In-house QC lab1 suiteGSM cutter and scale, colourimeter, tensile tester and seam-strength jigs for incoming and final checks.

Equipment list reviewed October 2026. Exact machine availability and capacity for your specification is confirmed at quotation.

What we can document — and what we will not claim.

Buyers increasingly need evidence for their own compliance teams. We would rather send you the actual document than display a badge. Here is what can be arranged for an order.

Test reports available on request

Seam strength, GSM, colour fastness and handle-load tests can be arranged per order or per material lot. Timing and cost are confirmed before testing.

Supplier material declarations

Composition, recycled-content availability and recyclability notes supplied by our upstream material vendors for the specific construction — provided as received, not re-issued as our own certification.

Export & destination documents

Commercial invoice, packing list, bill of lading and certificate of origin. Destination-specific requirements are reviewed before the order is accepted.

Audit support

Buyer-arranged or third-party audits are welcome by appointment; we provide access to the production area, records and retention samples.

No certification logos — ISO, BRC, GRS or otherwise — are displayed on this website. If a certificate is mandatory for your market, ask before quoting: we will tell you honestly whether we or our material suppliers hold the current document, and we will share it for verification rather than promising a logo we cannot substantiate.

Documents we can provide

Click a certificate to view the sample in detail. Official certificates and test reports are shared per project and order.

Samples are for layout reference. No certification marks are claimed on this site — request the official documents for your project.

Capacity planned around seasonal peaks.

Monthly capacity is split across the four bag families and reviewed each quarter. We reserve part of the line capacity for repeat buyers and rush orders instead of selling every hour of the month in advance.

Bags per month, nominal
2.4M
40HQ containers per month
40–45
Bag families on separate lines
4
Standard production window
12–18 d
Capacity planned around seasonal peaks.
Bag familyMonthly capacityNotes
Non-woven bags1,100,000 pcsStitched, heat-sealed and ultrasonic; 80–120 gsm; peak demand in Q4 retail campaigns.
Kraft paper bags700,000 pcsFood-grade and retail bags; twisted-paper, flat-paper or die-cut handles.
White cardboard bags400,000 pcsGift and retail bags with lamination, hot foil and embossing; longer setup, tighter scheduling.
PE bags & pouches200,000 pcsLDPE/HDPE shopping bags and zipper pouches; 50–80 micron; food-contact declarations on request.

Figures are nominal monthly capacity for standard sizes on a mixed one- to two-shift schedule. Capacity for your exact specification, material and print method is confirmed during quotation.

Next step

Ask for the quality pack for your order.

Tell us the bag type, material and quantity you are evaluating. We can include the relevant test reports, material declarations and inspection plan with your quotation.