Skip to content
BAIGEPackaging

Retail & grocery · Western Europe — supermarket chain

Reusable bag campaign for a European supermarket chain

A 1.2 million-piece reusable bag campaign for a Western European supermarket chain, produced across six print designs with per-region packing lists and a 38-day artwork-to-shipment window.

Laminated non-woven supermarket shopping bags printed for a European retail campaign
Industry
Retail & grocery
Bag type
Laminated non-woven shopping bag
Market
Western Europe — supermarket chain
Project highlight
0.6%

What the buyer needed to solve.

A Western European supermarket chain planned a reusable-bag campaign across four national regions and six store formats. Its previous supplier delivered artwork that looked correct on screen but drifted between production runs: brand greens shifted visibly from carton to carton, and in-store load tests tore the handle seams on roughly one bag in fifty.

This time the brief was stricter. The bag had to survive at least ten shopping trips at an 8 kg load, hold print colour within a measurable tolerance across six designs, and reach three distribution centres on a fixed date — with no room for a second production batch.

Procurement also asked for per-region carton labels, a documented QC plan with inspection records, and pre-production samples approved before bulk material was ordered.

How the bag was specified and produced.

We specified a 110 gsm non-woven PP body laminated with 12 μm BOPP film, then printed it by eight-colour gravure for dense, scuff-resistant coverage. The 420 × 350 × 180 mm bag uses ultrasonic side seams, an X-stitched handle patch and a 25 mm bottom gusset; the pre-production sample passed a 12 kg static load test.

Colour was locked before production. The client approved Pantone references on press sheets, and every lot was measured against those references with a spectrophotometer — all six designs stayed within ΔE 1.8.

Production ran in three sequenced lots with per-region carton labels and barcodes, flat-packed 100 bags per carton. Lots shipped to three distribution centres in the order the client's regional teams needed them, and each dispatch followed an AQL 2.5 inspection with photos sent before loading.

Customization at a glance

Beyond the base bag, the project specified a 110 gsm body with BOPP lamination, eight-colour gravure printing on both sides, an X-stitched handle patch, a 25 mm bottom gusset, per-region carton labels and barcodes, 100-piece flat packing, and a three-way pallet plan for the distribution centres.

We also produced a 2% spare allowance inside the same lot, so the client could replace bags damaged during store rollouts without ordering a short reprint run.

What the project delivered.

The full 1.2 million-bag order shipped 38 days after artwork approval, with all six designs landing in the same colour window. Inspection found a 0.6% defect rate at AQL 2.5, and no handle failures were reported during the client's receiving checks.

The campaign launched on schedule across all four regions. The same specification and colour references were reused for the following season's repeat order of 900,000 bags, which cut sampling to a single approval round.

Measured outcomes

1.2M
Reusable bags produced
38 days
Artwork approval to final shipment
ΔE ≤ 1.8
Colour variance across six designs
0.6%
AQL 2.5 inspection defect rate

Production and packing detail.

Representative views from this project's production and packing stages.

Laminated non-woven supermarket shopping bags printed for a European retail campaign
Reusable non-woven shopping bag in use at a retail store

Start a similar project

Tell us the bag, the volume and the date.

Send size, material, printing and quantity. We reply with pricing, sampling options and a production schedule within one business day.